Why should you clean your carpets?

When you have carpet in your home it provides a nice soft surface to walk on, but it also helps with sound acoustics as well as air filtration.  Walking on the carpet brings in soil which can be soluble (grease, oils, food spills)  or insoluble (dirt, sand, debris).  When your carpet gets soiled it begins to break down the carpet fibers commonly known as fuzz-out.  When this happens, there is no repair for this except to replace the carpet.  With regular vacuuming and a cleaning schedule your carpet will last a long time and still look good too!

How do we get your carpets clean?  

• Give the area to be cleaned a good vacuuming.

•  Apply hot Cleaning Solution to the carpet.

•  Rake the Cleaning Solution into the carpet.

•  Let Cleaning Solution dwell of the carpet for ~15 minutes.

•  Use the Steam Extractor and remove the soil from the carpet.

•  Rake the carpet to let it stand vertical and straight for rapid drying.

• Drying time is about 4 hours. 

Equipment we use:

To thoroughly clean carpets and upholstery you need four things:  suction, chemicals at the proper temperature and agitation.  We do this by using an extractor which has 300 cfm of suction and water pressure ranging from 100 - 500 psi.  We heat the chemicals and rinse water to roughly 180°F.  Utilizing a rotary vacuum head that agitates the chemicals, rinses the carpet and removes the dirt leaving the carpet fresh and clean.  I also have the option to run as a portable not needing to leave doors open with hoses running out to a truck.  I do however normally run as a truck mount system utilizing the larger water tanks mounted in the van.

We complete our cleaning process utilizing save biodegradable chemicals that are environmentally friendly and not dangerous to be used around young children and pets.